Circuit Breaker

Contactor

Relay

Distribution Board

Push Button Switches

Meters

Fuses

Power Inverter

Industrial Sockets and Plug

Waterproof Switch

Temperature Controller

Automatic Transformer Switch

Energy Saving Lamp

Automatic Voltage Regulator & UPS

Cable Accessories

Electrical Accessories

Wall Switch

Location: Home Page >> Electrical Accessories >> Capacitor >> HY-PFR Reactive Power Compensated Controller

back
HY-PFR Reactive Power Compensated Controller

HY-PFR Reactive Power Compensated Controller - Capacitor - Electrical Accessories

 

Summary:
HY reactive power auto-compensation controllers is suitable for automatically adjusting of low voltage distribution system capacitor compensating device to make power factor get user's predetermined state, increase service efficiency of power transformer reduce line loss,and improve the voltage of power supply.

Function Characteristic:
1.Accounting switch on and switch off capacity by the fundamental wave reactive power may avoid any form and switch on and switch off vibration,and be able to demons trate the electrical network power factor correctly under the harmonic wave situation.
2.High,messuring accuracy of power factor,wide display scopt.
3.Real time display total power factor(pF)and fundamental wave power factor(DPF).
4.Real time display voltage distortion current distortion rate.
5.There are five codes output types for user's selection.
6.16 steps output at most.
7.Friendly human-computer interface,easy to operate.
8.Various Controlling pattern whole digits unable,easy to operate.
9.Two working modes of auto running and manual running.
10.Over-voltage and under-voltage protective function.
11.Voltage harmonic wave over norm protective function.
12.Data can not loss as it has breaking power supply protective function.
13.Current signal switch on impedance is lower than 0.01.

Service Condition:
1.Not over altitude 2500m.
2.Ambient temperature-2550.
3.Air humidity is less than 50% at 40.And is less than 90% at 20.
4.working in the medium which not any corrasive gas,electric conduction dust inflammable and explosive matters.
5.The installation site without shrewd vibration

Specifications:
Rated,working Voltage:AC380V or 220V
Rated working Frequency:45HZ-65HZ
Measuring Power:0-999Kvar
Under-voltage prective Value:AC300Vor AC180V
sensitivity:20mA
Rated,working current:AC 0-5A
Display power Factor:Lag 0.001-lead 0.001
Measuring Active Power:0-9999KW
Output Contact Capacitance:AC 220V 7A
Complete machines contact Consumed power:10VA
Display:4-position red nixie tube
Overall Dimension:144mm144mm or 122mm122mm
Hole Dimension:144mm144mmor 113mm113mm
Installation Mode:inserting type installation rear gear accessories fixed or guide rail installation
Connection Mode:Socket connecting terminal screw fasten protection
Class:Encloure lp 40


back