Modified Sine Wave Power Inverter 1600W (CAR1.6K)

 

Output socket:

Features:
1)Input protections:Polarity reverse / Over and under voltage / Low battery Alarm and shut down
2)Output protections:Short circuit / Overload / Over temperature
3)With power ON/OFF switch and LED indicator
4)Input and output fully isolation
5)Low power consumption(standby)
6)LVD meet EN60950 and E8 mark
7)EMC meet EN61000-6-1-3,EN55022

Specifications :
 -  Max. continuous output power: 1600W
 -  Max. continuous output power 2H.: 1700W
 -  Surge capability peak output power: 3200W
 -  DC input static current (no load): 1.8AMP
 -  AC output wave form: Modified Sine wave
 -  Normal input voltage range: 11-15V / 21-30V
 -  High voltage cut off level:15V / 30V
 -  Low voltage alarm: 10.6V0.3V(DC12V) / 20.5V0.5V(DC24V)
 -  Low voltage cut off level: 9.5V0.5V(DC12V) / 19.5V0.5V(DC24V)
 -  Output AC voltage: AC 115V5% RMS / AC 230V 5% RMS
 -  Output frequency level: 60HZ1Hz / 50HZ
 -  Overload power range: 1600W, 5-30% 
 -  Hi-pot test: PRI/sec, 1500V/AC 5mA/60s
 -  Temperature protection: 65
 -  Full load max. optimum efficiency: 90%
 -  AC output short circuit protection: system shut down (no damage)
 -  Fan run: inner temperature rising up is 40
 -  Fault warning: alarm beep
 -  LED indicator:
　　a) Normal: green
　　b) Fault: red green
 -  Fuse (spade type): 40A6pcs
 -  Dimensions (LWH): 32017677mm
 -  Environmental condition:
　　a) Operating temperature: -545
　　b) Operating relative humidity: 10-90% RH
　　c) Storage temperature: -1050
　　d) Storage relative humidity: 10-95% RH

---

Previous Page: Modified Sine Wave Power Inverter 1200W (CAR1.2K)
Next Page: Modified Sine Wave Power Inverter With Charger 1000W(SPA1000)
Keyword: Power Inverter Power Inverters Sine Wave Power Inverter