Product introduction
Lightning injury mainly is by the way of the line of power supply or signal circuits for connected equipment. Cons equently it is necessary that it shall protect power line or circuits effectively from being damaged or personnel injury.
MBX-N series surge protective device, adopts international latest gas discharging tube, TVS tube, solid discharging tube of quicker response, good non-linear curve, large flux, as the protective elements, assembled with auxiliary components, via optimized production technology. Which lessen the output residual voltage. When equipment happen to over-voltage, this SPD quickly respond leading overcurrent discharged into ground, limiting the line voltage within permissible value, and finally to protect personnel safety and equipment from being damaged.
The product meets with IEC61643-1 and related standards.
Product purpose
Surging protection for computer, network station, data exchanging network can avoid the damage due to inductive voltage and surging voltage coming from signal circuit.
Installation
This surge protect ive device will be series connected between circuit and protected equipment, outp ut terminal of SPD shall be connected with input of equipment to be protected, the circuit distance connected shall be short as possible, this can get best protection effect.
The PE line shall be reliably connected with earthing line of lightning system, this leading wire shall be shortest as possible, to get good protection effect.
If this SPD discharged the surging many times and take on invalidation, please replace it on time, to ensure continuous safety.
This product belong to termination protection device, due to uncertainty of lightning and surging, it shall cooperate well with anterior protection appliance in consideration of working conditions, in order to get good protection effect .
Model Signification
Technical Parameter
| Model and specification | Rated voltage | Flux | Protective level | Insertion loss | Response time | Interface mode |
| MBX-N | 12V | 5KA(8/20) | <35V | <0.2VdB | 10ns | RJ45 |
