Product introduction
MBX1-RJ11 series signal surge protective device (hereinafter called SPD) is suitable for the circuit of Modem, DDN special line, facsimile, telephone and etc, to protect communication equipment from being damaged by lightning impulse and other transient over voltage.
MBX1-RJ45 series signal surge protect ive device (hereinafter called SPD) is suitable for the circuit of Ethernet, local area network (LAN), Token ring, server, routers, Hub, broad band, the functions of rough protection, fine protection, precise protection can meet with different requirements for protection zone against surging, to protect RJ45 inter face and communication equipment from being damaged due potential rise up or over-voltage result from circuit induction.
Operation Elements
MBX1-RJ11: Small cross sectional area, low inductive voltage drop, dual protection against over-voltage and overloading, outer shell is made of shielded Al.
MBX1-RJ45: Input and output by RJ45 male/ female connector, easy to be connected and assembled, small cross sectional area, low inductive voltage drop, dual protection against over-voltage and overloading, outer shell is made of shielded Al.
Installation
- To be mounted in the interface between LPZ1 to LPZ3.
- To be mounted in the interface of RJ11, as required, it can form multiple poles or multi circuit lightning proof device, in the joint of PZ2, connected with multi-strand soft copper conductor of 2.5 - 35mm2.
Model and Signification
Technical Parameter
| Model and specification | MBX1-RJ11 | MMBX1-RJ45 | |||
| AC110 | DD5 | ED5 | DD12 | ED12 | |
| Network service voltage | DC110 | DC5 | DC12 | ||
| Maxi continuous operating voltage | DC150 | DC6 | DC15 | ||
| Voltage protective level | 500 | 40 | 60 | ||
| Attackdischarging current | 6000 | ||||
| Nominal discharging current | 3 | ||||
| Frequency bandwidth | 2MHz | 100MHz | |||
| Insertion loss | ≤0.5db | ≤0.3db | |||
| Protective circuit | 3, 4 | 1, 2, 3, 6 | |||
| Response time | <1 | ||||
| Invalid factor | Communication circuit Short connected with ground, or communication circuit opened. | ||||
Outside Size Fig
